FILTRATION IS OUR LEGACY.
Emitter protection filtration solutions
One of the most common irrigation system challenges is preventing emitters clogging caused by various organic and inorganic materials. Clogging can severely decrease the irrigation system’s performance and create the need for frequent maintenance. Our complete range of field-proven filtration solutions answer the need for clean water of farmers around the world, saving them time, water and energy costs.
Applications
Drip Irrigation
Localized irrigation that delivers drops of water and sometimes added nutrients directly to the plant roots.Small volumes of water pass through the drippers.
Required filtration degrees: 80-130 micron
Small volumes of water pass through the drippers.
Required filtration degrees: 80-130 micron
Micro Sprinklers
Provides water using very fine droplets or spray through narrow tubes, directly to the base of the plant.Medium volumes of water pass through the nozzles.
Required filtration degrees: 130-300 micron
Medium volumes of water pass through the nozzles.
Required filtration degrees: 130-300 micron
Sprinklers
Water is distributed through a system of pipes to spray heads and then applied over the entire surface of the soil.Large volumes of water pass through the nozzles.
Required filtration degrees: 200-3500 micron
Large volumes of water pass through the nozzles.
Required filtration degrees: 200-3500 micron
Pivots
A center pivot distributes water through sprinklers located on a center pivot that moves on wheeled towers, anchored at one end and rotate around a fixed central point. Lateral move irrigation is similar to the center pivot method, but without a fixed point and moves up and down as opposed to circular.Large volumes of water pass through the nozzles.
Required filtration degrees: 500-3500 micron
Large volumes of water pass through the nozzles.
Required filtration degrees: 500-3500 micron