- Amiad Water Systems Cost-effective cooling water filters and filtration solutions

COOLING WATER

YOUR WATER CHALLENGE.
OUR FILTRATION SOLUTION.

Cooling water filtration solutions

Our filtration solutions are ideally suited to help cope with the challenges of cooling water applications.

Industrial manufacturing facilities typically require the utilization of cooling equipment to cool down high-temperature processes and face various challenges within cooling water applications: on one hand, the manufacturing facility needs to protect its equipment (heat exchangers in cooling towers and machinery) from water contents; on the other hand, environmental regulations for protecting water sources require the manufacturers to return utilized water in a non-pollutant state to their sources. Filtration is needed both for safeguarding equipment and to abide by these regulations. Our filtration solutions help maintain good water quality by continuously removing suspended solids and other solid materials, improve heat transfer efficiency and decrease operating costs.

APPLICATIONS

Applications

Nozzles Protection

Spray nozzles are used throughout manufacturing processes, usually for product cooling or washing. Nozzles wear over time and affect production efficiency, product quality, increase maintenance costs and impact revenue. The best approach is to protect nozzles by installing filtration to reduce the amount of particles that can cause erosion and clogging of the feed water. Our efficient filtration solutions enable nozzles to operate without blockage or erosion, increasing their lifespan and keeping processes steady and efficient.

Water being sprayed from water spray nozzles

Nozzles Protection

Cooling Towers Side Stream

Cooling tower systems are most efficient when heat transfer surfaces are clean. As cooling towers operate outdoors, they are vulnerable to dirt and debris which can cause scaling, fouling, and microbiological activity. Our range of 25-100 micron filters for 5-15% of the side stream flow provide a cost-effective solution to increase system efficiency, reduce corrosion rates, maintenance costs and chemical use.

Cooling Towers Side Stream

Cooling Systems Full Stream

Full stream filtration is used to directly protect heat exchangers and chillers by installing a coarse filter on the discharge side of the pump (typically 100-500 microns) and finer filtration to protect equipment such as nozzles, heat exchangers, etc. Our filters offer a wide range of filtration degrees and can provide solutions throughout the full stream process.

Cooling Systems Full Stream

Heat Exchangers Protection

Heat exchangers are considered core equipment in manufacturing facilities where their efficiency is critical for process stability. Filtration installed upstream from the heat exchanger reduces suspended solids and debris, leading to reduced scaling, less fouling and less biological growth in the system. Our highly efficient filtration solutions protect the heat exchanger and increase its lifespan and productivity, reduce down time and help stabilize downstream processes, saving energy and costs.

Heat Exchangers Protection

Condenser and Chiller Loop Protection

Condenser and chiller loop systems for exchanging heat with other liquids include pipes and pumps with narrow water passageways. Filtration is required in order to remove large particles and prevent clogging, and small particles to prevent sedimentation. Our filtration solutions protect these systems by continuously removing suspended solids, ensure long-term equipment operation and save maintenance costs.

Condenser and Chiller Loop Protection

Pump Seal Protection

Filtration is important for protecting pump seals and bearings, as it removes particles especially those with hard exteriors. These particles can cause damage that requires seal and/or bearings replacement and leads to costs incurred by labor and spare parts. Our wide range of reliable, durable filtration solutions efficiently protect pump seals and bearings and save costly maintenance.

Pump Seal Protection

Cooling Tower Makeup

Makeup water aims at completing the volume of water lost through evaporation, blowdown and draft and is usually added to the cooling tower basin. Water treatment can increase the cycles in the cooling tower, reduce water consumption up to 50% and consequently reduce the cooling tower blow down (wastewater), as well as reduce the chemical consumption for water conditioning. Our filtration solutions provide more stable water quality, lower fouling and corrosion, reduction of chemicals used and process optimization.

Cooling Tower Makeup

PRODUCTS

Selected Products